Description
Just like the materials in the EASYWEED Family, EasyWeed Adhesive HTV has a carrier side and a material side. The carrier side is noticeably smoother and shinier than the material side. Now you may notice the material side looks like it doesn’t have any, well, material. That’s because it’s simply a layer of mostly transparent glue. Not just any glue though, EasyWeed Adhesive HTV! EasyWeed Adhesive can not only be used with screen printing foils, it also works with fabrics and other materials that lend themselves to adhesion. EasyWeed Adhesive can be cut on any vinyl cutter and requires the typical steps before cutting Siser heat transfer vinyl. Make sure to mirror your design and place the carrier side face down on the cutting mat. Then make sure you pin the image below so you can always find your cut settings! I always recommend a test cut before cutting a full design. How old your blade is and how loved it is will effect your blade and cut settings, so make sure your blade produces a good cut with our suggested settings or make some adjustments. If you’re using a large format cutter, like the Roland GX24, you’re cut settings will be GF: 80-90, Offset: .250, CM/S: 30 with a 45? blade. If you’re using a 60? blade, the settings are the same except the offset is changed to 3.50. When it comes to weeding EasyWeed Adhesive HTV you may drive yourself crazy trying to weed it on top of a light colored surface. Instead, weed on top of a dark table or place a dark piece of paper or fabric behind the material so you can identify the cut lines.
EasyWeedTM Adhesive 12″ Roll (11.8″ actual size)
You are purchasing One yard Easyweed Adhesive
GSM FLORIDA WILL SEND YOU A MESSAGE WITH PRODUCT INFORMATION
